Thursday, October 14, 2010

"Warriors serpent Z" property and injury Xiangjie



First note that there is no harm in this for half the set floating, no property to float downward air combat situation does not float, like combat injuries, if dZi with property damage hit the float does not float but can exceed air injury

The following attributes are that 10

Ice: Ice 60% damage bonus after living and effective technical ice invalid (Sima Yi R1LR1, far from Lu Chi C3-1 property that comes with the effect of ice or to Iceman's)

Yang: van concluded that 30% of the large addition

Very Italian: 40% bonus

Courageous: 40% bonus

Nagging one, the addition is connected by relationships, rather than base damage bonus after independent superposition. For example, a property C technology, with 20 plus 60% of enhanced X-type, 20 special 60% bonus to strengthen, then attach a 10-pole 10-yong, it should be the base damage 脳 1.6 脳 1.6 脳 1.4 脳 1.4

Chop: Add the enemy 10% of the current blood damage. Note that this is a "plus", is an independent part of the injury, special effects, other properties, as well as Liu Bei and Yuan Shao Ares ax R1 buff like the addition of cut will not hurt, that is,

Damage algorithm should be: based on a variety of injuries 脳 additive (with x) + cut injuries (10% of the enemy the current blood) (Monkey show the relevant sense Xiefeng Chen test)

Happening: The enemy has been floating plus 60%

Technology-based generals C Technical float damage bonus: The enemy has been floating 100% bonus

This is often called the "technology-based native Happening." Attention to technology-based military officer comes dZi and weapons can be superimposed on the Happening, is still connected by way of superposition, that is 脳 2 脳 1.6, not 脳 2.6; other technology-based military officer's own dZi C technology as long as they can deploy Even if no attribute C technology can also be.

Ray: van big conclusion has already been given, 10 mine is an addition 30%. But can be found that if mine play with a group of people, damage will be very unstable. If one to one case, the injury is stable, but the addition of mine, or more than 30% higher (and yang can be compared). There is also a phenomenon

Ray launched into 1combo is considered, such as Air / C3 non-cloned play with mine a single person, but apparently only 9-type is displayed as 10combo. Also, if not only been hit by moves to mine infection can also see the injury of blood. So it can be concluded, addition of 30% of the mine in addition to the injury, but also there is an additional harm, let's call it lightning damage, when more than one person playing multiple infections can cause many lightning injuries.

After further testing, when the mine property to launch an enemy on every hit to produce a visual effect not determined, in bulletdata in number is 075, the power factor of 2, not death. Moves against state changes (not float moves into a slow down, floating air moves into a stationary low float) is determined by the additional effect. As for the so-called infection, is to be produced by the enemy side effects of lightning hit. To note here - lightning effects can be weapons bonuses of! Power factor as the basis of only two small injuries, so very brave like Italy that the addition of lightning injury is no longer meaningful, but it can add chopped property enough. Therefore, the 10 mine is only 30% of the significance of the damage bonus, but also provide at least one more likely to attribute launch.

Combat skills is not infectious and can be hit when a lightning, but when the general effect of technology is not infectious and can not be hit by lightning, the thunder Tachibana C6 with single people are still just 6combo, enemy is still giddy state. However, the effect of technology to play more than one person, we still have the opportunity to obtain additional properties through the transmission of launch. If you own property is another property with the effects of weapons technology, such as the Wu Kingdom R1, Dian Wei R3, Sun City, R4, C2-F and other women endure, mine will not happen transmission.

Cloned: cloned with properties not say is not accurate. 10 cloned the basis of injury and body against the same, and Lei Yang Yong cut very broken, and technology-based native Happening in addition also can enjoy. But Ray, the cloned mine property can only enjoy 30% bonus with no additional lightning damage.

Descendents of harm to non-10 were: 10 脳 cloned cloned damage Lv 脳 10%

As mentioned above, cut injury is independent and free from all kinds of factors in addition, but the cloned injury last 10 cloned Lv amendment is to modify the overall damage, so the cloned less than 10, then sub-cut body injury the same will be crippled.

Cloned from cyclone-hit area addition.

Another effect of technology cloned invalid, that we all know.

Single property and technology to combat the problem will not install Happening

First, the so-called "mine Happening", which means "Thunder will launch dZi launch, regardless of whether the enemy can launch floating Happening" theory, regardless of the PS2 is not true, the PC is certainly not correct , single property of Ray and play ground equipment Happening with the enemy, dZi which can not be hit on the addition of injury.

Then the properties of single combat skills has no use loading Happening? If this attack can make enemies float, then the fitted points behind, cloned in the attack which could be dZi addition. Specific example, Air / fitted cloned and Happening, the Happening on the descendents of C1C4 combat the onset, but his C3, as body can not make enemies float against empty (regardless of Ray equipment is not installed), so Happening C3 is invalid on the descendents of combat.

Again discussed, if a single attribute of the generals against technology installed main Lei Yang chopped very distracted after the spin, leaving a property or equipment dZi brave good? Brave fight simultaneously on the body and cloned a 40% increase against percent, while the dZi only hit in the body floating under the premise that 60% of the cloned anti addition. Type the generals on the force-type speed, the more obvious advantages of bravery, but as I said before cutting off the enemy by the current physical injury is calculated, when the body against damage equipment dZi low residual strength over the enemy to combat, therefore cloned harm than the cut when the mounted fierce attacks when the cloned high-cut injury, after taking into account this brave not much higher than the Happening also. And force-based speed-type properties are usually single combat skills can not be a second person, (Zhen Ji C4 of this super power factor as well as the first female tolerance R1 plus the state of exception, etc.) whether the two can be off loaded brave mounted Happening Therefore, the installation does not matter which. On technology-based military officer, having regard to technology and technology-based C floating damage bonus, respectively, 1.4 +1.4 脳 2 and 1 +2 脳 1.6, damage is almost non-cut, then cut the same reason to consider the difference between injury, dZi has advantage. In fact, technology-based military commanders if they can give up one of the brave dZi cyclone rapidly mounted on cobble together Lei Yang Yong-min break cut seven plus extremely offensive attributes, then one can choose a direct air or air flight C star excited difficult technical spike public face. (Argentine C4-1 is an exception, the power factor can not afford to lower seconds, but she can first burst R1 ~)

Proficiency and the impact of exclusive props to injury

Proficiency on the R technology, the power-based military commanders of nirvana, the generals of the two speed type martial, a military general, technology-based skills EXC SP counter and technology skills affect the injury, the other technical skills and general C had no effect on injuries.

Proficiency equivalent to the exclusive prop up a cell, such as proficiency with the exclusive eight-nine grid of dummy equal proficiency without exclusive props.

Each cell technology proficiency bonus damage on R 4 percent. Proficiency has been considered a 0 cells, addition of 4%; proficiency MAX plus exclusive props, equivalent to 10 cells, addition of 40%.

However, the technology-based military commanders and C the same effect as the effect of technology skills do not enjoy this class EXC addition, as the three generals of the R5, R3 Third Afghan-style. (Sun City, R4 and C4 are different effects, R4 can enjoy the proficiency bonus)

There are also a handful of exceptions do not enjoy this addition: Dong Zhuo R1, R1, and counter-Xin Xuan, Ningning LR1, on British R1, Cao LR1, 3 into R1, Nobunaga counter, counter Zhuge Liang, Zhang Jiao counter, helped the girl counterattack, Huang counterattack. Cao Ren R2 only those under arrest addition, the effect of blowing flying skills without addition.

Technology-based military commanders on the EXC Technology

If the EXC and technology to fight technology, the power factor than the C and Technology, in general, C technology power factor of 12, three military officers and party agents from the Warring States Period 12 EXC technical power factor of 24, the Warring States Period 8, the power coefficient of Technology side generals EXC 14. If the EXC technology for effective technology, as a result of natural power coefficient and C the same technology. (Ibid., Sun City, R4 and C4 is not the same effect, R4 effects of power factor than the effect of high and comes with inflammation C4)

Descendents of technology come questions about EXC. First of all, descendents of weapons technology attributes EXC invalid. EXC comes with a cloned technology appears, but the EXC descendents of technology comes with only visual effect, only count as one hit, rather than body + cloned two hit. Zhao Yun Lei and cloned equipment, C4 blown away, and R4 is starting a small float, this is the proof. In addition, unparalleled in the process of being descendents of the cloned and EXC as purely visual effects, and the profound meaning of the Warring States Period characters in the Warriors use the same weapons and technology C descendents of property is invalid.

Because only a hit count, so do not usually appear C EXC technology skills that are too high due to rapid disappearance of harm caused cloned determine the situation of instability.

For the very brave these attributes in terms of meaning, because even by related, high power factor and low power factor hit a two strike can be no different.

But Happening is not the case with the cut. Earlier on said that if a C technology can make enemies float, then you can split themselves up against the dZi onset, but EXC technology, only one hit will not be able to enjoy dZi natural increase became the same time, no technology Type C Technical float into injury increases. C1 R1 and cloned by Zhao Yun example, although the power coefficient C1 R1 twice, then count proficiency MAX props and exclusive 40% bonus, be 2.8 times the damage, but 2.8 is still less than 1 +2, let alone 1 +2 脳 1.6 of the. As for the cut, blow hit the distinction between the two is more obvious that EXC will cost additional time and technology cut injury. Taken together, Zhao Yun Lei Yang chopped broken equipment Yong grade, and strengthen the special enhanced with technology-based, C1 can be difficult to five-star general public direct spike excited face, and then bring slay even enhanced, R1 can only make the majority of the public face empty of blood (less the public face of the kind of civil service type can be seconds). Warring parties Generals 8 EXC technology to increase the power factor not much more than a cloned C.







相关链接:



"Dragon Century: Origins," the official prequel novel Translation Preview



XviD to iPhone



3GPP to WMV



PHOTOSHOP Repair Facial Photographs Of Smooth Posts



BenQ-Siemens alliance in name only waveguide waveguide front continued hard



Urgent situation of 3G intellectual property rights on how long the operator toddler



Mac can become the THIRD money-maker Jobs



Mito Xiu 1 minute Transfiguration "Impressionism" Photo



5 bills PAID to foreign fixed up on the boss



CMMI: Tailored, is the fundamental



Imovie import 3gp import 3gp to imovie how to



TOD Converter



reviews Dial Up And Connection Tools



Top Music Composers



reviews File Compression



Evaluate Business Databases And Tools



Friday, October 8, 2010

CAD world, Shangri-La


"Shangri-La", mysterious and poetic dream world is a desirable place. "Shangri-La mechanical CAD" drawings for the mechanical characteristics of the common plane mapping software, will be boring into fun, the "machine" into the art world here seems to have become a graphic of "Shangri-La."

Civilian style

Shown in Figure 1, into the "Shangri-La mechanical CAD" interface, you can clearly feel the AutoCAD style.



Figure 1 Shangri-La CAD interface

"Shangri-La mechanical CAD" drawing step more in line with traditional, beginner CAD Some people may be more accustomed. After several steps to complete a drawing on the drawing. Includes determining the size of drawings, select the type of border and binding, positioning the baseline and the use of the toolbar or menu command draw, edit, modify graphics.

Learn and use the "Shangri-La mechanical CAD" simple, but the software's functionality is not weak, rendering mechanical parts and assembly drawings are very handy.



Figure 2 form with the usual graphical

In short, the software can see the background with the school, reflecting the developers and the teaching of drawing skill and careful pondering attitude.

The most admirable 4:00

1. To help enrich and complete

"Shangri-La mechanical CAD" software CD-ROM only about 30M of space, the other a few megahertz multimedia software for learning materials in a variety of software systems that are rare,

2. Practical, "Structure and Gallery"

"Shangri-La mechanical CAD" in the "structure and Gallery" menu bar is the "mechanical" characteristics of the important elements, it provides a standard parts library although not to mention a wide range, but very useful.

3. Photo-text applications

"Shangri-La mechanical CAD" menu item in a column called "Form", and the earlier Microsoft Word menu bar of the same name is almost the same nature. This also reflects the "Shangri-La mechanical CAD" for the text editing service is very important.

4. Text, size of the batch changes

"Shangri-La mechanical CAD" provides the bulk editing text, dimensions variable function, can be more than one text, size, engineering mark in the font, size and so unified.

"Shangri-La mechanical CAD" is not worthy of improvement has no place, such as 3D features. The problem is positioning relative to its user base and its corresponding cost, "Shangri-La mechanical CAD" is almost close to perfect.

Domestic CAD market trends

Throughout the development of the domestic market situation of CAD, probably can be summarized as the following:

1, two-dimensional CAD software to maintain stable growth in demand

Due to lower prices, but domestic CAD software is very mature technology, service level gradually increased, so companies in the CAD project, will increase the two-dimensional CAD software, CAD software, in particular the use of domestic volume.

Second, rapid growth of demand for three-dimensional modeling software

On the one hand, users of three-dimensional understanding of enhanced software functionality; the other hand, provides three-dimensional CAD software companies will greatly enhance the propaganda.

Third, CAPP, PDM and other enterprise software will be the hot buy

Manufacturing enterprises are no longer satisfied with simple "rejection drawing board" work, but strive to realize the modernization of technology sector. Therefore, this year will be the CAPP software company purchased one of the hotspots. CAD technology enables storage needed to store previous drawings and technical information into an electronic map document. How to effectively manage plan documents, plan documents to ensure easy retrieval and statistical summary, the enterprise is vital, and this created a huge demand for PDM software.

Fourth, SMEs demand on the CAD technology

CAD software market increased steadily in recent years, the price gradually reduce to the past, only state-owned large and medium enterprises to apply the CAD software, has now become a hot application for SMEs. Software companies have proposed various solutions for SMEs. The use of CAD software, many SMEs have achieved good results. CAD software on the expected demand for small and medium enterprises will be further expanded.

CAXA "step ahead"

CAXA is not a very good understanding of the word, Beihang Haier own description is: CAX refers to arbitrary, individualized computer-aided design and product, followed by A-ALWAYS A STEP AHEAD for the English abbreviation of the overall meaning is "one step ahead of the computer assistive technology and products. "



Simple interface

CAXA leading spirit when more is reflected in its three-dimensional software for two-dimensional electronic drawing board, more detailed work is needed, really and truly bring more convenience to users.

Simple interface and toolbar

"CAXA electronic board V2" start soon, with low hardware requirements that the starting point is associated. CAXA to take care of the low profile of the small screen, its arrangements for menus and toolbars, and Office of the toolbar style is quite similar.

Excellent data exchange capabilities

In the "computer drawing board," made for a class of two-dimensional CAD software, "CAXA electronic board V2" data exchange capabilities be excellent. CAXA full support for AutoCAD 12.0 ~ 2000 version of dwg, dxf files, support for IGES files; can read WMF, HPGL graphics file; can read the data generated in text form. Dat file.

Utility

"CAXA electronic board V2" There are three useful tools included: "CAXA Print layout", "CAXA File Browser", "CAXA drawing management." Drawing management program can automatically generate product tree can also be manually generated, and to edit, query, statistics and other operations.

Standards and Standardization

CAXA electronic board V2 full support for the latest national standards, and adopted a national standard of review of mechanical CAD. Software meet the national standard frame, title bar, list, text annotation, dimensioning and annotation of other projects, thus ensuring a comprehensive standardization of the design process.

"One step ahead" is the slogan of CAXA, common people, nuanced, full of affinity, the trial "CAXA electronic board V2" when deep feelings.






Recommended links:



QUICKTIME to MPG



Find driving force behind IPV6



Precise, Accurate, Precise GIS Successful In Distant



REALDRAW help you reproduce wooden sound box (1)



MacWorld site spy photos



MPG To AVI



Nine ways to recruit good STAFF



OGM to AVI



Common JSP Title 8: JSP's Basic Concepts



Simple Management And Distribution



Blog: Beware of the computer in the city's "hidden rules"



Good Password Managers



reviews Covert Surveillance



Wang Haibo: Society WORLD partners, with 10 000 win



avid media Composer for students